Thursday, June 08, 2017

IRS2980 - LED Driver Control IC - International Rectifier

A high-voltage buck regulator control IC for LED light bulb replacement, LED tube lighting and other non-isolated LED driver applications.First in a family of high-voltage LEDrivIR ICs, and utilizes hysteretic average current mode control for precise current regulation. EOL

IRS2980 - LED Driver Control IC - International Rectifier

IRS2980 - LED Driver Control IC - International Rectifier

Some of the Features - Dimming LED driver controller, Hysteretic Current Regulation, Closed-loop LED current dimming control, Analog/PWM Dimming Input, Internal High Voltage Regulator.

IRPLLED13 - 90-250VAC Offline LED Driver using LEDrivIR IRS2980

Non-isolated constant current buck regulator,  90-250V AC input voltage, 0-50V DC output voltage, Nominal output current of 350mA.

A simple single st age power converter based around the IRS2980 LED driver IC provides a contro lled current output ov er a wide AC line or DC voltage input range.

The IRPLLED13 evaluation board is an off line non-isolated constant current Buck regulator LED driver designed to supply a nominal 350mA DC output current. The LED output voltage can be up to 90% of the input voltage, operating from an AC line input volt age between 90 and 250VAC 50/60Hz. The IRPLLED13 demo board is not de signed for use with dimmers.

Monday, June 05, 2017

ST7LITE09 and LED driver STP16CP05

A cost effective solution to drive an array of high brightness LEDs, using the LED driver STP16CP05. The Brightness and Color is uniform due to current regulation. High efficiency DC-DC converter. Wide Input voltage range - 5 V to 35 V.

STEVAL-ILL003V2 HB 32 LED

 STEVAL-ILL003V2 HB 32 LED

  • DC-DC converter for high efficiency
  • 32 LED matrix driven by STP16CP05
  • LED current regulation
  • Adjustable brightness
  • Animated text capability
  • Adjustable blinking speed
This evaluation board represents a cost effective solution to drive an array of high brightness LEDs, using the LED driver STP16CP05. This driver provides the same constant current for each of its output channels, thus there is no difference in brightness and color between the LEDs.

Friday, June 02, 2017

Constant LED Brightness and LDS8711

The LDS8711 is a fixed frequency current mode boost converter with internal rectifier and cycle-by- cycle switch current limit specifically designed to drive a string of up to 10 White LEDs.

Constant LED Brightness and LDS8711

A Switching Converter Chip with hardly any external components driving a HB LED chain. HB - High Brightness LED. This IC is from IXYS Power Devices.

High efficiency boost converter with the input voltage range from 2.7 to 5.5 V . Drives one LED string with 10 LEDs in series up to 32 mA.
  • 250 mV current sense voltage
  • No external Schottky Required
  • 0.7 MHz Switching Frequency
  • Efficiency greater than 83%
  • PWM LED Brightness Control
  • Low Shutdown Current (<1µA)
LED Current Setting - The maximum current value in the LED string may be factory preset in the range from 10 to 30mAin 0.125mA steps, or set by Smart OneWire interface in the range from 0.125to 32 mA.The average LED string current that determines LED brightness may be controlled applying PWM signal to the EN/PWM pin.